English  |
| Quantity: | |
|---|---|
Sinter Plate Filter Element - Sintered Plate Filter - DELTA type filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant.
Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side.
Comparing to conventional filter media：
no movement in the filter media; no wear.
| Parameter Media Code | NT1 | AT1 | NT2 | AT2 |
| Efficiency | 99.999% @ 1μm | |||
| Operation Temp. | 70℃ | 70℃ | 100℃ | 100℃ |
| Purging Air Pressure | 2.5~5.0 Bar | |||
| Electrostatic Leakage Resistance | N/A | ≤ 106Ω | N/A | ≤ 106Ω |
| A/C Ratio | 0.8～1.3 m/min | |||
| Air Resistance | 1500～2000 Pa(Depends on operating conditions) | |||
| Gasket Ring Installation Type | Raw Gas / Clean Gas | |||
* Please indicate “Size + Media Code + Gasket ring installation type” when ordering.
Example: Sinter Plate Filter Element, Type: Delta2_1500/9 NT1 (raw gas).
| Steel Industry | Nonferrous Metallurgy | Automobile Industry | Ore Processing | Rubber Tyre Industry |
| Electronics Industry | Foundry | Laser-Cutting | Chemical Industry | Pharmacy |
| Food Processing | Glass and Ceramics Industry | Cement and Lime Industry | Metal Work | … |
Sinter Plate Filter Element - Sintered Plate Filter - DELTA type filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant.
Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side.
Comparing to conventional filter media：
no movement in the filter media; no wear.
| Parameter Media Code | NT1 | AT1 | NT2 | AT2 |
| Efficiency | 99.999% @ 1μm | |||
| Operation Temp. | 70℃ | 70℃ | 100℃ | 100℃ |
| Purging Air Pressure | 2.5~5.0 Bar | |||
| Electrostatic Leakage Resistance | N/A | ≤ 106Ω | N/A | ≤ 106Ω |
| A/C Ratio | 0.8～1.3 m/min | |||
| Air Resistance | 1500～2000 Pa(Depends on operating conditions) | |||
| Gasket Ring Installation Type | Raw Gas / Clean Gas | |||
* Please indicate “Size + Media Code + Gasket ring installation type” when ordering.
Example: Sinter Plate Filter Element, Type: Delta2_1500/9 NT1 (raw gas).
| Steel Industry | Nonferrous Metallurgy | Automobile Industry | Ore Processing | Rubber Tyre Industry |
| Electronics Industry | Foundry | Laser-Cutting | Chemical Industry | Pharmacy |
| Food Processing | Glass and Ceramics Industry | Cement and Lime Industry | Metal Work | … |
