English  |
| Quantity: | |
|---|---|
filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant.
Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side.
Sinter Plate Filter(XDHD) are specifically designed for high filtration efficiency and low pressure drop. The monolithic design is also very strong and durable, making it ideal for a variety of applications.
Product Advantages:
Longest service life of sintered plates up to 10 years
Long service life, relatively low maintenance and consumables costs
Optimized geometry reduces pressure drop
Increased pleats in each chamber significantly increase filter area
Constant pressure drop keeps airflow constant, helping to improve equipment efficiency
Surface filtration for high separation efficiency
Monoblock sintered plate design for compact rigidity
Suitable for abrasive dusts
Completely fiberless filter media, ideal for product recovery
Can be cleaned, recycled, and refurbished
Can be provided with anti-static or non-anti-static sintered plates
Can be installed from either dirty gas or clean gas side
Can be installed horizontally or vertically
Direction of installation
Depending on the individual application and process requirements horizontal or vertical installation is possible.
1 Clean gas-side installationInstalling
the filter elements from the clean gas side enables optimal and clean access to the filter elements and provides highest possible protection for the personnel.
2 Raw gas-side installation
Installing the filter elements from the raw gas side usually allows a direct and optimal revision of the raw gas area. It requires no additional height above the filter system for servicing the filter elements.
| Picture | Item No. | A | B | C | D | D₂ | E | n | Filter area |
| mm | mm | mm | mm | mm | mm | ㎡ | |||
  | XDHD750-9 | 565 | 490 | 424 | 758 | 720 | 551 | 8 | 2.3 |
| XDHD1200-9 | 565 | 490 | 424 | 1203 | 1165 | 551 | 8 | 3.7 | |
| XDHD1500-9 | 565 | 490 | 424 | 1495 | 1457 | 551 | 8 | 4.7 | |
| XDHD750-18 | 1047 | 966 | 901 | 755 | 705 | 1035 | 17 | 4.7 | |
| XDHD1200-18 | 1047 | 966 | 901 | 1200 | 1150 | 1035 | 17 | 7.6 | |
| XDHD1500-18 | 1047 | 966 | 901 | 1500 | 1450 | 1035 | 17 | 9.4 |
filter element consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant.
Both the material and the specially developed lamella, changed to the delta-shaped extended-surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side.
Sinter Plate Filter(XDHD) are specifically designed for high filtration efficiency and low pressure drop. The monolithic design is also very strong and durable, making it ideal for a variety of applications.
Product Advantages:
Longest service life of sintered plates up to 10 years
Long service life, relatively low maintenance and consumables costs
Optimized geometry reduces pressure drop
Increased pleats in each chamber significantly increase filter area
Constant pressure drop keeps airflow constant, helping to improve equipment efficiency
Surface filtration for high separation efficiency
Monoblock sintered plate design for compact rigidity
Suitable for abrasive dusts
Completely fiberless filter media, ideal for product recovery
Can be cleaned, recycled, and refurbished
Can be provided with anti-static or non-anti-static sintered plates
Can be installed from either dirty gas or clean gas side
Can be installed horizontally or vertically
Direction of installation
Depending on the individual application and process requirements horizontal or vertical installation is possible.
1 Clean gas-side installationInstalling
the filter elements from the clean gas side enables optimal and clean access to the filter elements and provides highest possible protection for the personnel.
2 Raw gas-side installation
Installing the filter elements from the raw gas side usually allows a direct and optimal revision of the raw gas area. It requires no additional height above the filter system for servicing the filter elements.
| Picture | Item No. | A | B | C | D | D₂ | E | n | Filter area |
| mm | mm | mm | mm | mm | mm | ㎡ | |||
| XDHD750-9 | 565 | 490 | 424 | 758 | 720 | 551 | 8 | 2.3 |
| XDHD1200-9 | 565 | 490 | 424 | 1203 | 1165 | 551 | 8 | 3.7 | |
| XDHD1500-9 | 565 | 490 | 424 | 1495 | 1457 | 551 | 8 | 4.7 | |
| XDHD750-18 | 1047 | 966 | 901 | 755 | 705 | 1035 | 17 | 4.7 | |
| XDHD1200-18 | 1047 | 966 | 901 | 1200 | 1150 | 1035 | 17 | 7.6 | |
| XDHD1500-18 | 1047 | 966 | 901 | 1500 | 1450 | 1035 | 17 | 9.4 |
